Mercury Elite 1200 Pro Line Interactive UPS, 1200VA/720W, Offline, 4X Universal Socket, 2X 7.5AH Battery, W/ Schuko Power Cord, Black | UP000128
Wide Input Voltage Range
Compatible With Generator
Overload Protection
Short Circuit Protection
Built-In AVR
Battery Deep Discharge Protection & Overcharge Protection
Included warranty
1 Year
Contact us
Product Description
Elite 1200 Pro
Specifications
Input voltage | 220VAC |
Input frequency | 50Hz |
Input phase | Single phase |
Input socket | With Fuse |
Cold Start (0 to 100% load) | Press the ON/OFF switch |
Input range (220V) | 140-300 |
Rating output (VA). | 1200VA |
Rating output (W). | 720W |
Waveform | Battery mode(simulated sine wave),AC mode(sine wave) |
Power factor | 0.6 |
Rating voltage | 220V |
Output range | 220Vac-7% to +15% in battery mode |
Rear Output Socket | 4 x Universal - Battery backup |
Transfer time | TYPICAL4-8ms |
Communication Interface | optional RS232/RJ11 |
Rating frequency | 50Hz |
Line-mode | Synchronize with the Utility |
Battery mode | 50 Hz±1Hz |
Line Mode | FUSE& firmware protection |
Battery Mode | Software protection controlled by firmware |
Line Mode | 110%±5%; Go to fault mode after 5 minutes, 120%±5%; Go to fault mode immediately. |
Battery Mode | 110%±5%; Shutdown after 5 seconds, 120%±5%, Shutdown immediately |
Rating | 2 X 12V/7.5AH (Actual rating 7AH) |
Backup time - Typical | 20 to 30 mins (depending on load) |
Charge current | About 1A at normal mode. |
Over charge protection | 29V±0.2V stop charging, 27.4+/-0.2V recharge |
Weight | 8.6+/-0.3 Kg |
Dimensions per unit packaging | 395x205x258mm |
Packsize per Master carton | 2 |
Dimensions per Master carton | 410x430x273mm |