APC Smart-UPS, Line Interactive, 3kVA, Rackmount 2U, 230V Main Input & Output Voltage, 8x IEC 320 C13, 3 IEC Jumpers, 1x IEC 320 C19 Output Connection, SmartSlot, AVR, LCD

SMT3000RMI2U

This APC Smart-UPS is designed for IT professionals or network administrators to maintain business uptime and continuity. The 3kVA line interactive 2U rackmount UPS provides pure sine wave power to support critical electronics during power disruptions. It comes with IEC 320 C20 input, BS1363A British and Schuko CEE 7/EU1-16P input cables, 8x IEC 320 C13 and 1x IEC 320 C19 outlets, and 3x IEC jumper cables. It has a SmartSlot for optional Network Management Card that enables graceful shutdown of physical servers, virtual machines & HCI Clusters via PowerChute Network Shutdown. The UPS can connect to EcoStruxure IT or third-party centralized management platforms. It provides surge protection against lightning strikes, power sags, brownouts and surges. It is compatible with a dedicated user-replaceable battery, and the APC replacement battery cartridge helps restore UPS performance to the original specifications.

Specifications

Main
Run time for load	2700 W
Min-Max Load	270-2700 W
Runtime	3 min 11 sec
Max Capacity Used	100%
Main Input Voltage	230 V
Other Input Voltage	220 V, 240 V
Main Output Voltage	230 V
Other Output Voltage	220 V, 240 V
Rated Power	2700 W
Rated Power in VA	3000 VA
Product Type	Uninterruptible power supply (UPS)
Input Connection Type	BS1363A British, IEC 320 C20, Schuko CEE 7 / EU1-16P
Output Connection Type	8 IEC 320 C13, 3 IEC Jumpers, 1 IEC 320 C19
Number of Rack Units	2U
Cable Length	2.00 m
Number of Cables	1
Battery Type	Lead-acid battery
Provided Equipment	USB cable, country-specific detachable power cord, documentation CD, installation guide, rack mounting support rails, smart UPS signalling RS-232 cable, temperature probe
Range of Product	Smart-UPS
Complementary
Communication Port Type	SmartSlot
Batteries & Runtime
Run Time	View Runtime Graph
Efficiency	View Efficiency Graph
Additional Information	Configurable for 220, 230, or 240 nominal output voltage
Extended Runtime	No
Battery Filled Slots	0
Battery Free Slots	0
Battery Recharge Time	3 hours
Battery Replacement Qty	1
Battery Life	3–5 years
Replacement Battery	RBC43
Battery Charger Power	182 W rated
General
Number of Power Modules	0
Power Module Filled Slots	0
Power Module Free Slots	0
Redundant	No
Physical
Height	8.6 cm
Width	48 cm
Depth	68.3 cm
Net Weight	44.28 kg
Mounting Location	Front
Mounting Preference	No preference
Mounting Mode	Rack-mounted
USB Compatible	No
Input
Input Voltage Limits	151–302 V adjustable, 160–286 V
Network Frequency	50/60 Hz ± 3 Hz auto-sensing
Output
Max Configurable Power	2700 W, 3000 VA
Transfer Time	4 ms typical, 8 ms maximum
UPS Type	Line interactive
Wave Type	Sine wave
Output Frequency	47–53 Hz (50 Hz nominal sync to mains), 57–63 Hz (60 Hz nominal sync to mains)
Conformance
Product Certifications	CE, EAC, IRAM, RCM, VDE
Marking	GS Mark
Standards	EN/IEC 62040-1:2019/A11:2021, EN/IEC 62040-2:2006/AC:2006, EN/IEC 62040-2:2018
Environmental
Acoustic Level	55 dBA
Heat Dissipation	348 Btu/h
Operating Altitude	0–10,000 ft
Operating Temperature	0–40°C
Storage Temperature	-15–45°C
Storage Altitude	0–15,240 m
Relative Humidity	0–95%
Communications & Management
Control Panel	Multifunction LCD status and control console
Free Slots	1
LED Status Indicators	Online, on battery, replace battery, overload indicators
Alarm	Alarm on battery, distinctive low battery alarm, configurable delays
Surge Protection
Surge Energy Rate	320 J

APC Smart-UPS, Line Interactive, 3kVA, Rackmount 2U, 230V Main Input & Output Voltage, 8x IEC 320 C13, 3 IEC Jumpers, 1x IEC 320 C19 Output Connection, SmartSlot, AVR, LCD | SMT3000RMI2U

Additional Warranty

Product Description

Contact us